The short answer
Find and Shut off the Water Source
Your first priority is to stop more water from flowing. In a high-rise, you have a main water shutoff valve for your specific unit. It's often located near the water heater, under a sink, or in a utility closet. Knowing its location ahead of time is critical for quick action during an emergency.
If you cannot find or operate your unit's valve, you must contact building management immediately. They can access the main building water supply to isolate the problem. Do not attempt to shut off water for the entire building yourself. While waiting, use towels, buckets, or a wet/dry vacuum to collect as much standing water as possible from floors and surfaces.
Notify the Right People Immediately
Contact your building manager or superintendent right away. They need to know about any leak, as it may affect building systems, electrical panels, or other units. Provide clear details about the leak's location and severity. The building manager may have specific emergency protocols for you to follow, and they can coordinate access for repair professionals.
You should also alert your downstairs neighbor. Water from your unit can seep through ceilings, light fixtures, and walls into the apartment below. Giving them a heads-up allows them to move furniture or place containers to catch drips. This simple step can prevent significant secondary damage and maintain good relations with your neighbors.
- Call or go directly to your building's management office.
- Knock on your downstairs neighbor's door to inform them.
- Provide clear details about the source and extent of the leak.
- Follow any specific emergency instructions from building management.
- Do not assume the leak is contained to your walls or floors.
Document the Damage for Your Records
Take clear photographs and videos of all affected areas before you start cleaning or moving items. Capture the water source, the extent of pooling water, and any damaged belongings. This visual evidence is essential for your property insurance claim and for the building's records. Make notes about the time you discovered the leak and the steps you took.
Begin Initial Drying and Containment
Start drying the area while you wait for professional help. Use towels to soak up water from hard surfaces. A wet/dry vacuum can remove larger amounts of standing water from carpets. Increase air circulation by turning on ceiling fans and opening windows if weather permits. Using a dehumidifier can be very effective at removing moisture from the air.
Contain the moisture to one area. Close doors to other rooms to prevent humid air from spreading. If water has soaked into drywall or insulation, these materials may need to be removed to dry properly behind them. Do not puncture or cut into walls yourself, as this could disturb electrical wiring or create more damage.
When to Call for Professional Water Damage Help
For any significant leak, especially one involving walls, ceilings, or floors, contact local water damage pros. They have industrial equipment like air movers and dehumidifiers to dry structures properly and prevent mold. In a multi-unit building, hidden moisture can cause problems for others, so thorough drying is a shared responsibility. The pros can also assess for safety hazards like compromised electrical systems.
The cost for this service depends on the leak's size, the affected materials, and the required drying time. Your homeowners or renters insurance may help with these costs. Policies vary, and your insurer decides what is covered. A professional assessment provides the documentation needed for a successful insurance claim and ensures the building's integrity is restored.
- Call if water has soaked into drywall, insulation, or subflooring.
- Call if the leak originated from a pipe inside a wall or ceiling.
- Call if you notice any sagging or bulging in ceilings or walls.
- Call if the affected area is larger than a few square feet.
- Call if you smell a musty odor, indicating potential mold growth.
- Call if electrical outlets or fixtures were splashed or submerged.
Water damage does not wait
Phones are answered 24/7 for Akron and nearby communities.
Call Now (330) 632-1753Frequently asked questions
Who is responsible for paying for the damage in a high-rise leak?
Your responsibility typically starts at the interior walls of your unit. Damage to your belongings and repairs inside your apartment are usually covered by your renters or condo insurance. Damage to common building structure is generally the building's responsibility. Policies vary, and your insurer decides what is covered.
Can a leak in my unit cause mold in my neighbor's apartment?
Yes, absolutely. Moisture travels downward and sideways through building cavities. If walls or floors are not dried completely, mold can grow inside them and affect adjacent units. This is why prompt professional drying is crucial in a high-rise to protect everyone's health and property.
What should I do if the leak is coming from my ceiling?
Immediately place buckets and towels to catch water and move furniture out of the area. Notify your upstairs neighbor and building management, as the source is likely in their unit or a common pipe. Do not touch wet ceiling materials, as they can become heavy and collapse.