The short answer
Check Your Outlets and Extension Cords
Inspect every outlet in your home for signs of heat, discoloration, or sparking. Feel the faceplates with the back of your hand; if they are warm, that indicates a problem. Examine all extension cords for cracks, fraying, or exposed wires. Do not run cords under rugs or furniture, as this traps heat and damages the cord insulation over time.
Avoid overloading a single outlet with multiple high-wattage appliances. Use a power strip with an internal circuit breaker for electronic devices, not as a permanent solution for extra outlets. Remember that extension cords are for temporary use only. Permanent wiring needs should be addressed by a qualified electrician to ensure safety.
Manage Your Home's Electrical Load
Understand what appliances draw the most power, like space heaters, air conditioners, and microwaves. Never plug more than one major appliance into the same circuit. If your lights dim when an appliance turns on, that circuit may be overloaded. This is a warning sign you should not ignore.
Learn the location of your home's main electrical panel and individual circuit breakers. Label each breaker if they are not already identified. If a breaker trips repeatedly, it is a signal that the circuit is overloaded or faulty. Do not simply reset it; you need to reduce the load or consult an electrician.
- Unplug small appliances like toasters and coffee makers when not in use.
- Ensure large appliances have dedicated outlets and are not sharing circuits.
- Replace old, frequently tripping circuit breakers with help from an electrician.
- Use LED bulbs, which generate less heat than incandescent or halogen bulbs.
- Keep flammable materials like curtains and paper away from heaters and lamps.
- Hire an electrician to install AFCIs (Arc-Fault Circuit Interrupters) for enhanced protection.
Inspect Appliances and Light Fixtures
Go through your home and check each appliance cord for damage. Look at the plugs for signs of melting or burning. If an appliance smells like burning plastic or gets unusually hot during operation, stop using it immediately. These are clear indicators of an internal electrical fault.
Verify that all light fixtures use bulbs with the correct wattage. A bulb with too high a wattage for the fixture can overheat the socket and wiring. Ensure lampshades are not making direct contact with hot bulbs. Consider upgrading old fixtures, especially in bathrooms where moisture is present.
Address Water Damage and Moisture Risks
Water and electricity are a dangerous combination. If you have any water damage from a leak, flood, or high humidity, keep electrical components off until they are completely dry and checked. In Akron's humid continental climate, basements and bathrooms can be particularly prone to moisture issues. Never use electrical devices with wet hands or near standing water.
Signs of past water damage near outlets, like stains or warping, warrant caution. Moisture can corrode wires and connections inside walls, increasing fire risk. If you discover water damage near electrical systems, turn off the power at the breaker and contact a water damage pro for assessment and drying before restoring power.
- After any plumbing leak, have a pro inspect affected walls for hidden moisture.
- Use ground-fault circuit interrupter (GFCI) outlets in kitchens, bathrooms, and basements.
- Ensure your attic and crawl space ventilation is adequate to prevent condensation.
- If your AC drain line overflows, shut off the unit and address the water promptly.
- Store portable generators outside and away from windows to prevent carbon monoxide and moisture entry.
- Keep downspouts and gutters clear to direct water away from your home's foundation.
Create Long-Term Safety Habits
Make a monthly habit of testing all smoke and carbon monoxide alarms. Replace batteries at least once a year. Keep a multipurpose fire extinguisher in an accessible location, like the kitchen or near the electrical panel. Everyone in the household should know how to use it.
Schedule a professional electrical inspection every few years, or if your home is over 20 years old. An electrician can identify outdated wiring, such as knob-and-tube or aluminum, and recommend upgrades. These proactive steps help prevent fires that start hidden inside your walls, giving you lasting peace of mind.
Talk to someone now
Call (330) 632-1753 any time, day or night, and describe what happened.
Call Now (330) 632-1753Frequently asked questions
What should I do if an outlet sparks or smells like burning?
Immediately turn off the power to that outlet at your home's main electrical panel. Do not use the outlet or any devices plugged into it. Contact a qualified electrician to inspect and repair the issue before restoring power to that circuit.
Can water damage from a leak cause an electrical fire later?
Yes. Water can corrode wiring and compromise insulation inside walls, creating a short circuit or arc fault that may ignite long after the leak is fixed. If you have water damage, a water damage pro can ensure the area is thoroughly dry before an electrician checks the wiring.
How often should I replace the batteries in my smoke alarms?
Replace the batteries in your smoke alarms at least once a year. A good reminder is to do it when you change your clocks for daylight saving time. Test each alarm monthly by pressing the test button to ensure it is functioning properly.