The short answer
Carbon Monoxide Is Undetectable Without a Device
Carbon monoxide, often called CO, is a gas you cannot see, taste, or smell. It is produced whenever any fuel like gas, oil, wood, or charcoal burns. Common household sources include furnaces, water heaters, stoves, and fireplaces. A detector is your only early warning system for this invisible threat, which can accumulate to dangerous levels in enclosed spaces.
Your senses will not alert you to a carbon monoxide leak. This is why relying on symptoms like nausea or confusion is dangerous and unreliable. By the time you feel unwell, you may already be too disoriented to act. Installing detectors gives you an immediate, audible alarm, allowing you to get fresh air and seek help before severe poisoning occurs.
Health Risks of Carbon Monoxide Poisoning
Carbon monoxide poisoning occurs when you inhale the gas, which displaces oxygen in your bloodstream. This leads to oxygen deprivation in your vital organs, including your heart and brain. Initial symptoms often mimic the flu, with headache, dizziness, weakness, and nausea. Prolonged exposure can cause loss of consciousness, permanent brain damage, or be fatal.
The danger is particularly high when people are sleeping and may not notice early symptoms. Infants, the elderly, and those with chronic heart disease or breathing problems are at greater risk. If your detector alarms or you suspect poisoning, get everyone outside immediately into fresh air and call emergency services. Always see a doctor for evaluation, as effects can be delayed.
How Water Damage Can Create Hidden Co Risks
Water damage from leaks or flooding can indirectly create a carbon monoxide hazard. Moisture can corrode the vent pipes or connections on gas appliances like your furnace or water heater. This corrosion can cause cracks or blockages, allowing exhaust gases, including CO, to leak into your living space instead of safely venting outside.
If you have had recent water damage near gas appliances, it is wise to have them inspected by a qualified professional. A plumber or HVAC specialist can check for corrosion and ensure vents are clear. This is a critical safety step, as water damage often affects areas like basements or utility rooms where these appliances are located.
- Corroded furnace flue pipes from basement moisture.
- Blocked water heater vents due to debris washed in by flooding.
- Compromised seals on gas lines in damp wall cavities.
- Malfunctioning appliances that were submerged or exposed to high humidity.
- Vent obstructions from damaged building materials after water cleanup.
- Electrical shorts from water affecting appliance ignition systems.
Proper Placement and Maintenance of Detectors
For effective protection, install carbon monoxide detectors on every level of your home, including the basement. Place them outside each separate sleeping area so the alarm can be heard at night. Follow the manufacturer's instructions for mounting height, as CO mixes with air. Avoid placing them right next to fuel-burning appliances, as this may cause nuisance alarms.
Test your detectors monthly by pressing the test button. Replace the batteries at least once a year, or as recommended. The sensors in detectors have a limited lifespan, typically five to ten years. Check the manufacturer's date on the unit and replace the entire detector when it expires to ensure it remains reliable.
Steps to Take After a Detector Alarm
If your carbon monoxide alarm sounds, do not ignore it. Immediately move everyone, including pets, outdoors to fresh air. Do not waste time opening windows or investigating the source first. Once outside and at a safe distance, call 911 or your local fire department. They have equipment to detect CO levels and can identify the source.
Do not re-enter your home until emergency responders say it is safe. A qualified professional, such as a plumber or HVAC specialist, must inspect and repair any malfunctioning appliance before you use it again. If you feel any symptoms like a headache or dizziness, seek medical attention right away and inform the doctor about possible CO exposure.
Talk to someone now
Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.
Call Now (330) 632-1753Frequently asked questions
Where should I install a carbon monoxide detector?
Install a detector on every level of your home, including the basement. Place one outside each separate sleeping area. Follow the manufacturer's instructions for mounting height and location. Avoid installing them too close to kitchens or bathrooms where humidity may interfere.
What should I do if my detector goes off?
If the alarm sounds, evacuate everyone outdoors immediately. Do not try to find the source first. Call 911 or the fire department from outside. Do not re-enter until responders confirm it is safe and the source is repaired by a qualified professional.
Can water damage affect my risk of carbon monoxide?
Yes, water damage can corrode the vent pipes of gas appliances like furnaces or water heaters. This can cause carbon monoxide to leak into your home. After any water damage near these appliances, have a qualified plumber or HVAC specialist inspect them for safety.